L-31 · Two-person folding fishing boat
Your fishing boat. Packed for the car.
A rigid, inflation-free boat for two people on calm freshwater. The hull folds down, the frame packs separately, and the hard birch deck gives you a firm platform for lure fishing. Two stabiliser floats are supplied as standard.
5–6 min
Assembly with practice*
2–3 min
Pack down with practice*
280 kg
Usable load · L-31
0 pumps
No inflation required
*Supplier filmed tests report 5–6 minutes to assemble and 2–3 minutes to pack down with proficient operation. Allow extra time for your first setup.
Made for days on the water
Less to carry together. More room to fish.
The hull, frame and deck pack separately, so you can distribute the load and use the available space in your car. Set up by the water, fit the stabiliser floats, and enjoy a calm lake or slow freshwater river.
-
01
No pumping
A composite panel hull holds its shape without inflated air chambers.
-
02
Separate transport pieces
Move and stow the hull, frame and deck separately rather than lifting the assembled boat.
-
03
Firm fishing deck
A triple-fold birch plywood deck has an anti-slip surface. Use the floats and follow the manual when standing.
-
04
Fishing accessories
The frame provides mounting points for compatible seats, rod holders and a shade canopy. Confirm the included accessories before ordering.
Construction
Four-layer hull. Reinforced frame.
The hull combines outer PVC tarpaulin, a waterproof adhesive layer, a fibre-reinforced polypropylene core and inner PVC tarpaulin. Reinforced 6-layer / 9-layer PVC fold creases are joined using high-frequency heat sealing.
The frame uses three longitudinal and four transverse members, made from aluminium alloy and fibre-reinforced nylon. Nuts fasten it through the hull’s pre-drilled holes; colour-coded markers and retained nuts help with assembly.
-
Marine-grade birch deck
The anti-slip deck folds into three sections and weighs approximately 13.5 kg. Packed dimensions are about 90 × 60 × 9 cm.
-
Simple patch maintenance
There is no pressurised air chamber to seal. Follow the supplied repair instructions and inspect any damage before returning to the water.
- Outer mesh-reinforced PVC sheet
- Waterproof adhesive layer
- Fibre-reinforced polypropylene core board
- Inner mesh-reinforced PVC sheet
Layers shown from the outside in. The core provides stiffness and impact resistance.
- Three longitudinal and four transverse members
- Aluminium alloy and fibre-reinforced nylon components
- Nuts fasten the frame through the pre-drilled hull holes
Rigid mechanical connections support the assembled hull.
Meet the L-31
Two people. One packable fishing boat.
This page features the L-31 two-person model described in the supplied handbook. Dimensions are manually measured and approximate.
- Bow height: 46 cm
- Hull length: 310 cm
- Width with floats: 210 cm
- Hull depth: 35 cm
- Hull width: 120 cm
Hand-measured; dimensions are approximate.
- Hull length
- 3.10 m
- Hull width
- 1.20 m
- Hull depth
- 0.35 m
- Width with floats
- 2.10 m
- Persons
- 2
- Usable load
- 280 kg
- Folded hull
- 100 × 60 × 32 cm
- Frame bag
- 120 × 25 × 25 cm
- Deck weight
- ≈ 13.5 kg
- Folded deck
- 90 × 60 × 9 cm
The handbook distinguishes 280 kg usable load from 600 kg theoretical load. Use the 280 kg figure for trip planning, including people, gear and propulsion equipment. The theoretical figure is not an operating allowance.
Motor options
Bow or stern mounting
The handbook describes electric or petrol propulsion, with the power unit weighing no more than 20 kg. Rear mounting is vertical; front mounting is horizontal. This weight limit is not a horsepower rating. Confirm the suitable motor and mounting arrangement before buying.
- Rear power unit mounts vertically
- Electric or petrol propulsion equipment: maximum unit weight 20 kg
Motor pictured is an accessory example; inclusion and compatibility must be confirmed.
Transport & storage
The hull folds. The frame has its own bag.
The folded hull is approximately 100 × 60 × 32 cm. The frame bag is approximately 120 × 25 × 25 cm, with around 115 cm occupied length. The deck is a separate piece: measure your car’s opening and cargo area for all three before ordering.
- Folded size: approximately 100 × 60 × 32 cm
- Transport wheels allow the folded hull to be rolled.
Hand-measured; allow for small variations.
- Bag size: approximately 120 × 25 × 25 cm
- Occupied frame length: approximately 115 cm
Measure both your boot opening and cargo space.
- Two floats: approximately 6 kg combined
- Frame bag: approximately 6 kg
- Two seat boards: approximately 5.5 kg combined
- Hull: approximately 23 kg
- Deck: approximately 13 kg in the component diagram
Weights are approximate. The deck specification elsewhere in the handbook states about 13.5 kg; confirm the final package weight before ordering.
Transport wheels are listed in the basic accessory set; confirm the final package.
Suitable water
Calm freshwater, close to shore.
The handbook lists freshwater lakes, reservoirs, calm inland freshwater rivers and still water. Do not use in rapids or exposed water with strong winds and rough waves.
Fit the two standard stabiliser floats to the sides of the rear seat panel as instructed. They improve stability; they do not make the boat capsize-proof. Wear a lifejacket and follow the supplied operating manual.
- EVA float material
- Two floats supplied as standard
- Mount on both sides of the rear seat panel
Floats improve stability; they do not eliminate the risk of capsizing.
Product details
A closer look at the actual boat.
Product images edited from handbook references for a consistent presentation. Equipment shown may differ from the final package; confirm what is included before ordering.
- Outer mesh-reinforced PVC sheet
- Waterproof adhesive layer
- Fibre-reinforced polypropylene core board
- Inner mesh-reinforced PVC sheet
Layers shown from the outside in. The core provides stiffness and impact resistance.
- Three longitudinal and four transverse members
- Aluminium alloy and fibre-reinforced nylon components
- Nuts fasten the frame through the pre-drilled hull holes
Rigid mechanical connections support the assembled hull.
- Quick-setup structure, retained nuts and colour-coded markers
- Filmed tests: 5–6 minutes to assemble with proficient operation
Allow extra time for your first setup.
- Marine-grade waterproof birch plywood
- Three folding sections for compact storage
- Hard deck with an anti-slip surface
- The source handbook illustrates dark and light surface texture options.
Standing requires the stabiliser floats, suitable conditions and balanced loading.
- Front power unit mounts horizontally
- Electric or petrol propulsion equipment: maximum unit weight 20 kg
The 20 kg limit is a weight limit, not a horsepower rating.
- Two side floats fitted
- Overall width with floats: approximately 210 cm
Follow the assembly manual when attaching the floats.
- Frame mounting points for compatible seats and rod holders
- Tubular, curved, flat and vertical supports for accessory attachment
Seats, fishing gear and motor shown are examples; confirm the final retail package.
- Hull, frame and deck can be stowed separately
- Check the boot opening and available space in your own car
Vehicle shown is an example, not a guarantee of fit for every hatchback.
Before you choose your boat
How long does setup take?
Can I stand to cast?
What is the load limit?
What comes with the boat?
Will it fit in my car?
Where can I use it?
Retail preview
Your next fishing trip starts here.
We are preparing the L-31 retail package. Price, delivery destinations, shipping costs and warranty terms will be published once confirmed.
Enquiries are not open yet
This is a product preview. Online ordering and enquiry submission are not yet available.
Back to specifications